USB TYPE-C is a standard connector with a smaller volume than TYPE-A and TYPE-B, which can be applied to both PC (master device) and external device (slave device, such as mobile phone) interface types. The USB TYPE-C has 4 pairs of TX/RX cables, 2 pairs of USB D+/D -, 1 pair of SBUs, 2 CCs, and 4 VBUS and 4 ground wires.

The USB TYPE-C interface has the following characteristics:

1. Ultra thin, old-fashioned USB port length 14mm * 6.5mm, while USB-C only has 8.4mm * 2.6mm

2. Regardless of the front and back, like the Lightning interface, there will be no problems with both front and back insertion, and the lifespan can reach 10000 times

3. Fast transmission speed, with a maximum transmission rate of 10Gb/s on the USB-C port

4. Bidirectional transmission, the power transmission of the USB-C port is bidirectional and has two transmission power modes

5. The standard specification line equipped with TYPE-C connector can pass 5A current, and also supports USB power supply capabilities beyond the existing ones; USB PD", Can provide up to 100W of electricity,

In September 2022, the USB Promoter Group announced that its USB 4 second edition specification has a maximum data transfer rate of 80Gbps, supporting a total bandwidth of up to 120 Gbps.

Dongguan Xianhe Electronic Technology Co., Ltd. in Guangdong Province has been developing TYPE-C products since 2015, with rich development experience and proficient quality control capabilities. The main types of development include sinking plate SMT mother seat, vertical SMT mother seat, side inserted DIP mother seat, horizontal SMT mother seat, anti water mother seat, vertical SMT male head, clamp plate male head, etc.

Current rating:  5A

Contact resistance: ≤ 40 Milliohms Max

Insulation resistance: 100 Megaohms Min

Dielectric strength: 100V

Inserting force: 5-20N

Unmating force：8-20N

Durability: 10000 cycles

防水等级IPX8